PEX Insider

Product: Temperature Sensor For Ranco Control
Manufacturer: Ranco
Part Number: 1309007-044
Weight: 1
Price: 13.25
Special: Free Shipping on Orders Over 0
Description: This sensor can be used to replace the one that came with your Ranco ETC digital temperature controller or multiple sensors can be wired for average temperature sensing. See the instructions for your controller for wiring instructions and recommendations. This sensor is designed for use with ONLY Ranco ETC temperature regulating controls.

It is a negative temperature coefficient (NTC) thermistor sensor. The sensor resistance decreases with temperature increase. It is 0.25″ x 1.94″ long with 8 feed of #22 AWG cable. The thermistor has a reference resistance of 30,000 ohms at 77 °F(25 °C). Supports temp range of -30 °F – 220 °F

Note: The manufacturer does not recommend the sensor be directly submersed in liquids. They recommend using a thermal well (bulb well) to protect the sensor.

Product: Outdoor Shield Cover
Manufacturer: Ranco
Part Number: 107323A
Weight: 1
Price: 15.95
Special: Free Shipping on Orders Over 0
Description:

Product: Single Stage ETC Temperature Control w/ Sensor (120/240V Input, 0-10V Ouput)
Manufacturer: Ranco
Part Number: ETC-111100
Weight: 2
Price: 73.95
Special: Free Shipping on Orders Over 0
Description: Digital Display Unlike many electronic controls, the ETC is simple to install and set up. One finger is all you need to program it. The standard digital display and keypad allow the user to adjust the temperature settings with 1 degree resolution. Setpoint temperature, differential and mode of operation (heating or cooling) can all be selected using the keypad and display. When not in the programming mode, the display gives a constant readout of the sensor temperature. Annunciators on the liquid crystal display also indicate when the relay is energized. Remote Temperature Sensing The ETC is capable of remote temperature sensing up to 400 feet away from the control when using standard 22 gauge sensor wire. Built-In Safety Every ETC model is equipped with diagnostic programs that check for hardware, software, or system problems and display different error codes to indicate where the trouble is. The ETC also has a keyword lockout switch to prevent tampering with the control settings by unauthorized personnel. The switch, which is located inside the enclosure, can be used to disable the keypad function. Specifications Temperature Setpoint Range: 30 to 220 Degrees F Differential Range: 1 to 30 Degrees F Input Power Requirements: 120/208/240 VAC Sensor: Thermistor, 2″ long x 1/4″ Diameter, with 8′ cable Control Ambient Temperatures: Operating (20-140), Storage (40-176) Ambient Humidity: 0 to 95% RH, non-condensing Enclosure: NEMA 1 Dimensions: 6.52″ high x 2.7″ wide x 2.48″ deep 0 to 10V output Impedance: 1 k ohms Agency Approvals: UL Listed, CSA Certified Switch Action: SPDT

Product: Single Stage ETC Temperature Control w/ Sensor (120/240V Input, Plastic Enclosure)
Manufacturer: Ranco
Part Number: ETC-141000
Weight: 2
Price: 99.95
Special: Free Shipping on Orders Over 0
Description: Digital Display Unlike many electronic controls, the ETC is simple to install and set up. One finger is all you need to program it. The standard digital display and keypad allow the user to adjust the temperature settings with 1 degree resolution. Setpoint temperature, differential and mode of operation (heating or cooling) can all be selected using the keypad and display. When not in the programming mode, the display gives a constant readout of the sensor temperature. Annunciators on the liquid crystal display also indicate when the relay is energized. Remote Temperature Sensing The ETC is capable of remote temperature sensing up to 400 feet away from the control when using standard 22 gauge sensor wire. Built-In Safety Every ETC model is equipped with diagnostic programs that check for hardware, software, or system problems and display different error codes to indicate where the trouble is. The ETC also has a keyword lockout switch to prevent tampering with the control settings by unauthorized personnel. The switch, which is located inside the enclosure, can be used to disable the keypad function. Specifications Temperature Setpoint Range: 30 to 220 Degrees F Differential Range: 1 to 30 Degrees F Input Power Requirements: 120/208/240 VAC Sensor: Thermistor, 2″ long x 1/4″ Diameter, with 8′ cable Control Ambient Temperatures: Operating (20-140), Storage (40-176) Ambient Humidity: 0 to 95% RH, non-condensing Enclosure: NEMA 4 Dimensions: 7.84″ high x 2.7″ wide x 2.48″ deep Agency Approvals: UL Listed, CSA Certified Switch Action: SPDT

Product: Single Stage Temperature Control w/ Sensor (24V Input)
Manufacturer: Ranco
Part Number: ETC-112000
Weight: 2
Price: 59.95
Special: Free Shipping on Orders Over 0
Description: Digital Display Unlike many electronic controls, the ETC is simple to install and set up. One finger is all you need to program it. The standard digital display and keypad allow the user to adjust the temperature settings with 1 degree resolution. Setpoint temperature, differential and mode of operation (heating or cooling) can all be selected using the keypad and display. When not in the programming mode, the display gives a constant readout of the sensor temperature. Annunciators on the liquid crystal display also indicate when the relay is energized. Remote Temperature Sensing The ETC is capable of remote temperature sensing up to 400 feet away from the control when using standard 22 gauge sensor wire. Built-In Safety Every ETC model is equipped with diagnostic programs that check for hardware, software, or system problems and display different error codes to indicate where the trouble is. The ETC also has a keyword lockout switch to prevent tampering with the control settings by unauthorized personnel. The switch, which is located inside the enclosure, can be used to disable the keypad function. Specifications Temperature Setpoint Range: 30 to 220 Degrees F Differential Range: 1 to 30 Degrees F Input Power Requirements: 24 VAC Sensor: Thermistor, 2″ long x 1/4″ Diameter, with 8′ cable Control Ambient Temperatures: Operating (20-140), Storage (40-176) Ambient Humidity: 0 to 95% RH, non-condensing Enclosure: NEMA 1 Dimensions: 6.52″ high x 2.7″ wide x 2.48″ deep Agency Approvals: UL Listed, CSA Certified Switch Action: SPDT

Product: Single Stage Temperature Control w/ Sensor (24V Input, 0-10V Ouput)
Manufacturer: Ranco
Part Number: ETC-112100
Weight: 2
Price: 78.95
Special: Free Shipping on Orders Over 0
Description: Digital Display Unlike many electronic controls, the ETC is simple to install and set up. One finger is all you need to program it. The standard digital display and keypad allow the user to adjust the temperature settings with 1 degree resolution. Setpoint temperature, differential and mode of operation (heating or cooling) can all be selected using the keypad and display. When not in the programming mode, the display gives a constant readout of the sensor temperature. Annunciators on the liquid crystal display also indicate when the relay is energized. Remote Temperature Sensing The ETC is capable of remote temperature sensing up to 400 feet away from the control when using standard 22 gauge sensor wire. Built-In Safety Every ETC model is equipped with diagnostic programs that check for hardware, software, or system problems and display different error codes to indicate where the trouble is. The ETC also has a keyword lockout switch to prevent tampering with the control settings by unauthorized personnel. The switch, which is located inside the enclosure, can be used to disable the keypad function. Specifications Temperature Setpoint Range: 30 to 220 Degrees F Differential Range: 1 to 30 Degrees F Input Power Requirements: 24 VAC Sensor: Thermistor, 2″ long x 1/4″ Diameter, with 8′ cable Control Ambient Temperatures: Operating (20-140), Storage (40-176) Ambient Humidity: 0 to 95% RH, non-condensing Enclosure: NEMA 1 Dimensions: 6.52″ high x 2.7″ wide x 2.48″ deep 0 to 10 V output impedance: 1 k ohms Agency Approvals: UL Listed, CSA Certified Switch Action: SPDT

Product: Two Stage Temperature Control w/ Sensor (120/240V Input)
Manufacturer: Ranco
Part Number: ETC-211000
Weight: 2
Price: 97.95
Special: Free Shipping on Orders Over 0
Description: Digital Display Unlike many electronic controls, the ETC is simple to install and set up. One finger is all you need to program it. The standard digital display and keypad allow the user to adjust the temperature settings with 1 degree resolution. Setpoint temperature, differential and mode of operation (heating or cooling) can all be selected using the keypad and display. When not in the programming mode, the display gives a constant readout of the sensor temperature. Annunciators on the liquid crystal display also indicate when the relay is energized. Remote Temperature Sensing The ETC is capable of remote temperature sensing up to 400 feet away from the control when using standard 22 gauge sensor wire. Built-In Safety Every ETC model is equipped with diagnostic programs that check for hardware, software, or system problems and display different error codes to indicate where the trouble is. The ETC also has a keyword lockout switch to prevent tampering with the control settings by unauthorized personnel. The switch, which is located inside the enclosure, can be used to disable the keypad function. Specifications Temperature Setpoint Range: 30 to 220 Degrees F Differential Range: 1 to 30 Degrees F Input Power Requirements: 120/208/240 VAC Sensor: Thermistor, 2″ long x 1/4″ Diameter, with 8′ cable Control Ambient Temperatures: Operating (20-140), Storage (40-176) Ambient Humidity: 0 to 95% RH, non-condensing Enclosure: NEMA 1 Dimensions: 6.52″ high x 2.7″ wide x 2.48″ deep Agency Approvals: UL Listed, CSA Certified Switch Action: SPDT

Product: Two Stage Temperature Control w/ Sensor (120/240V Input, 0-10V Output)
Manufacturer: Ranco
Part Number: ETC-211100
Weight: 2
Price: 127.95
Special: Free Shipping on Orders Over 0
Description: Digital Display Unlike many electronic controls, the ETC is simple to install and set up. One finger is all you need to program it. The standard digital display and keypad allow the user to adjust the temperature settings with 1 degree resolution. Setpoint temperature, differential and mode of operation (heating or cooling) can all be selected using the keypad and display. When not in the programming mode, the display gives a constant readout of the sensor temperature. Annunciators on the liquid crystal display also indicate when the relay is energized. Remote Temperature Sensing The ETC is capable of remote temperature sensing up to 400 feet away from the control when using standard 22 gauge sensor wire. Built-In Safety Every ETC model is equipped with diagnostic programs that check for hardware, software, or system problems and display different error codes to indicate where the trouble is. The ETC also has a keyword lockout switch to prevent tampering with the control settings by unauthorized personnel. The switch, which is located inside the enclosure, can be used to disable the keypad function. Specifications Temperature Setpoint Range: 30 to 220 Degrees F Differential Range: 1 to 30 Degrees F Input Power Requirements: 120/208/240 VAC Sensor: Thermistor, 2″ long x 1/4″ Diameter, with 8′ cable Control Ambient Temperatures: Operating (20-140), Storage (40-176) Ambient Humidity: 0 to 95% RH, non-condensing Enclosure: NEMA 1 Dimensions: 6.52″ high x 2.7″ wide x 2.48″ deep 0 to 10V output Impedance: 1 k ohms Agency Approvals: UL Listed, CSA Certified Switch Action: SPDT

Product: Two Stage Temperature Control w/ Sensor (120/240V Input, Plastic Enclosure)
Manufacturer: Ranco
Part Number: ETC-241000
Weight: 2
Price: 136.95
Special: Free Shipping on Orders Over 0
Description: Digital Display Unlike many electronic controls, the ETC is simple to install and set up. One finger is all you need to program it. The standard digital display and keypad allow the user to adjust the temperature settings with 1 degree resolution. Setpoint temperature, differential and mode of operation (heating or cooling) can all be selected using the keypad and display. When not in the programming mode, the display gives a constant readout of the sensor temperature. Annunciators on the liquid crystal display also indicate when the relay is energized. Remote Temperature Sensing The ETC is capable of remote temperature sensing up to 400 feet away from the control when using standard 22 gauge sensor wire. Built-In Safety Every ETC model is equipped with diagnostic programs that check for hardware, software, or system problems and display different error codes to indicate where the trouble is. The ETC also has a keyword lockout switch to prevent tampering with the control settings by unauthorized personnel. The switch, which is located inside the enclosure, can be used to disable the keypad function. Specifications Temperature Setpoint Range: 30 to 220 Degrees F Differential Range: 1 to 30 Degrees F Input Power Requirements: 120/208/240 VAC Sensor: Thermistor, 2″ long x 1/4″ Diameter, with 8′ cable Control Ambient Temperatures: Operating (20-140), Storage (40-176) Ambient Humidity: 0 to 95% RH, non-condensing Enclosure: NEMA 4 Dimensions: 7.84″ high x 2.7″ wide x 2.48″ deep Agency Approvals: UL Listed, CSA Certified Switch Action: SPDT

Product: Two Stage Temperature Control w/ Sensor (24V Input)
Manufacturer: Ranco
Part Number: ETC-212000
Weight: 2
Price: 103.95
Special: Free Shipping on Orders Over 0
Description: Digital Display Unlike many electronic controls, the ETC is simple to install and set up. One finger is all you need to program it. The standard digital display and keypad allow the user to adjust the temperature settings with 1 degree resolution. Setpoint temperature, differential and mode of operation (heating or cooling) can all be selected using the keypad and display. When not in the programming mode, the display gives a constant readout of the sensor temperature. Annunciators on the liquid crystal display also indicate when the relay is energized. Remote Temperature Sensing The ETC is capable of remote temperature sensing up to 400 feet away from the control when using standard 22 gauge sensor wire. Built-In Safety Every ETC model is equipped with diagnostic programs that check for hardware, software, or system problems and display different error codes to indicate where the trouble is. The ETC also has a keyword lockout switch to prevent tampering with the control settings by unauthorized personnel. The switch, which is located inside the enclosure, can be used to disable the keypad function. Specifications Temperature Setpoint Range: 30 to 220 Degrees F Differential Range: 1 to 30 Degrees F Input Power Requirements: 24 VAC Sensor: Thermistor, 2″ long x 1/4″ Diameter, with 8′ cable Control Ambient Temperatures: Operating (20-140), Storage (40-176) Ambient Humidity: 0 to 95% RH, non-condensing Enclosure: NEMA 1 Dimensions: 6.52″ high x 2.7″ wide x 2.48″ deep Agency Approvals: UL Listed, CSA Certified Switch Action: SPDT